top of page

A/C Help & Answers

Practical answers for Central Texas homeowners who like to understand their A/C. Start with simple checks, learn what warning signs mean, and know when to call for help.

From RK Hamshire Services • Updated October 4, 2026

Follow your equipment's owner manual. These guides cover basic homeowner checks; leave electrical compartments, capacitors, wiring, and refrigerant work to a qualified technician.

A/C not cooling? What to check before calling

A warm house does not always mean a major repair. Start with the controls and airflow. If you see ice, smell burning, or notice water near electrical equipment, stop using the system and arrange service.

Three checks you can make

  1. Check the thermostat. Select Cool and a temperature below the current room temperature. Check the schedule or hold setting. If the display uses replaceable batteries, follow its instructions. Give the system time to respond; avoid repeatedly switching it on and off.

  2. Check the filter. Turn the system off before inspecting an accessible homeowner-serviceable filter. Replace a dirty disposable filter with the specified size and type, following the airflow arrow. Do not run the system without a filter or open equipment panels to search for one.

  3. Look for blocked airflow. Keep supply registers open and return grilles clear of furniture. From outside the unit, look for leaves or objects blocking outdoor airflow. Stay clear of the fan and do not remove guards or panels.

When to call

If these checks do not restore cooling, the cause needs diagnosis. Do not repeatedly reset a tripping breaker or add refrigerant. Tell us when the problem started, the thermostat reading, and whether you saw ice or water. Those details help us understand the symptoms.

How often should I change my air filter in Central Texas?

Check your filter monthly, then replace or clean it according to its condition and the equipment manufacturer's instructions. There is no single replacement interval that fits every home.

What changes the schedule?

Heavy cooling use, pets, dust, and nearby construction can make a filter load up sooner. A deep media filter may have a different service interval than a one-inch filter. Set a monthly reminder to inspect it and note the replacement date.

Choose the right filter

Use the dimensions and filter type specified for your system. A higher MERV number is not automatically a better fit: airflow resistance and system compatibility matter. Ask us before changing the filtration level if you are unsure.

Change it safely

Turn the system off and use only a filter location intended for homeowner access. Follow the airflow arrow and make sure the filter fits securely. Wash a filter only if it is labeled reusable, and follow its drying instructions. Never stack filters or operate the system without one. If the location is hard to reach or requires opening equipment panels, have a technician handle it.

A filter that gets dirty unusually quickly, weak airflow, or recurring ice deserves a closer look.

Why is there ice on my A/C—and what should I do?

Visible ice on refrigerant tubing or the indoor cooling coil is a warning sign. Restricted airflow and refrigerant problems are possible causes; ice alone does not tell you which one is responsible.

Stop cooling and let the ice thaw

Set the thermostat to Off. Do not keep cooling, chip away ice, or use a hair dryer, heat gun, or hot water. Allow it to thaw naturally and keep people clear of wet electrical areas. If water is reaching electrical equipment, stay away and get professional help.

Check only what is safely accessible

With the system off, check the homeowner-accessible filter and look for blocked return grilles or closed supply registers. Do not remove equipment panels, bypass a safety switch, connect gauges, or try adding refrigerant.

Arrange a diagnosis

Thawing removes the ice, but it does not necessarily fix the cause. Arrange service before returning to normal cooling, especially if the filter is clean or this has happened before. A technician can check airflow, blower operation, and the refrigerant system. Take a photo from a safe distance before the ice melts if possible.

Still need a hand?

RK Hamshire Services serves Leander and surrounding communities within a 30-mile radius. Tell us what you noticed, and we can help with the next step.

bottom of page